- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Nitrosomonas Medium
[所属分类:培养基配方] [发布时间:2021-6-21] [发布人:网站管理员2] [阅读次数:] [返回]
Nitrosomonas Medium
K 2 HPO 4 .........................................................................................0.5g
MgSO 4 ·7H 2 O..............................................................................0.05g
CaCl 2 ·2H 2 O ...............................................................................4.0mg
Cresol Red (0.0005% solution)................................................25.0mL
Ferric EDTA solution.................................................................0.1mL
pH 8.2–8.4 at 25°C
Ferric EDTA Solution:
Composition per 100.0mL:
FeSO 4 ·7H 2 O..................................................................................0.5g
Disodium EDTA.........................................................................0.14g
H 2 SO 4 , concentrated................................................................0.05mL
Preparation of Ferric EDTA Solution: Add components to dis-
tilled/deionized water and bring volume to 100.0mL. Mix thoroughly.
Preparation of Medium: Add CaCl 2 ·2H 2 O and MgSO 4 ·7H 2 O to
distilled/deionized water and bring volume to 500.0mL. Mix thorough-
ly. In a separate flask, add remaining components to distilled/deionized
water and bring volume to 500.0mL. Mix thoroughly. Autoclave both
solutions separately for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Aseptically combine the two sterile solutions. Mix thoroughly. Asepti-
cally distribute into sterile tubes or flasks. After inoculation, maintain
pH at 8.2–8.4 with sterile 50% K 2 CO 3 solution.
Use: For the cultivation and maintenance of Nitrosomonas europaea.
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
(NH 4 ) 2 SO 4 ....................................................................................3.0gK 2 HPO 4 .........................................................................................0.5g
MgSO 4 ·7H 2 O..............................................................................0.05g
CaCl 2 ·2H 2 O ...............................................................................4.0mg
Cresol Red (0.0005% solution)................................................25.0mL
Ferric EDTA solution.................................................................0.1mL
pH 8.2–8.4 at 25°C
Ferric EDTA Solution:
Composition per 100.0mL:
FeSO 4 ·7H 2 O..................................................................................0.5g
Disodium EDTA.........................................................................0.14g
H 2 SO 4 , concentrated................................................................0.05mL
Preparation of Ferric EDTA Solution: Add components to dis-
tilled/deionized water and bring volume to 100.0mL. Mix thoroughly.
Preparation of Medium: Add CaCl 2 ·2H 2 O and MgSO 4 ·7H 2 O to
distilled/deionized water and bring volume to 500.0mL. Mix thorough-
ly. In a separate flask, add remaining components to distilled/deionized
water and bring volume to 500.0mL. Mix thoroughly. Autoclave both
solutions separately for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Aseptically combine the two sterile solutions. Mix thoroughly. Asepti-
cally distribute into sterile tubes or flasks. After inoculation, maintain
pH at 8.2–8.4 with sterile 50% K 2 CO 3 solution.
Use: For the cultivation and maintenance of Nitrosomonas europaea.