- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
Archaeoglobus profundus Medium
山东拓普生物工程有限公司
Shandong Tuopu Biol-Engineering Co.,Ltd
Archaeoglobus profundus Medium
Composition per liter:
NaCl............................................................................................18.0g
MgCl2 ·6H2O..................................................................................4.0g
MgSO4 ·7H2O..............................................................................3.45g
Na2SO4 ..........................................................................................2.7g
Sodium acetate..............................................................................1.0g
NaHCO3 ........................................................................................1.0g
Yeast extract..................................................................................0.5g
KCl..............................................................................................0.34g
NH4Cl .........................................................................................0.25g
CaCl2 ·2H2O.................................................................................0.14g
K2HPO4 .......................................................................................0.14g
Fe(NH4 )2(SO4)2·7H2O ...............................................................2.0mg
Resazurin ...................................................................................1.0mg
Na2S·9H2O solution.................................................................25.0mL
Trace elements solution ...........................................................10.0mL
pH 6.5 ± 0.2 at 25°C
Trace Elements Solution:
Composition per liter:
MgSO4 ·7H2O................................................................................3.0g
Nitrilotriacetic acid.......................................................................1.5g
NaCl..............................................................................................1.0g
MnSO4 ·2H2O................................................................................0.5g
CoSO4 ·7H2O...............................................................................0.18g
ZnSO4 ·7H2O...............................................................................0.18g
FeSO4 ·7H2O..................................................................................0.1g
CaCl2 ·2H2O...................................................................................0.1g
NiCl2 ·6H2O...............................................................................0.025g
KAl(SO4)2 ·l2H2O........................................................................0.02g
CuSO4 ·5H2O...............................................................................0.01g
H3BO 3 .........................................................................................0.01g
Na2MoO4 ·2H2O ..........................................................................0.01g
Na2SeO3 ·5H2O...........................................................................0.3mg
Na2S·9H2O Solution:
Composition per 50.0mL:
Na2S·9H2O....................................................................................1.0g
Preparation of Trace Elements Solution: Add nitrilotriacetic
acid to approximately 500.0mL of distilled/deionized water. Dissolve
by adding KOH and adjust pH to 6.5. Add remaining components.
Bring volume to 1.0L with additional distilled/deionized water. Adjust
pH to 7.0 with KOH.
Preparation of Na 2 S·9H 2 O Solution: Prepare and dispense solu-
tion anaerobically under 80% N 2 + 20% CO 2 . Add Na 2 S·9H 2 O to dis-
tilled/deionized water and bring volume to 50.0mL. Mix thoroughly.
Adjust pH to 7.0. Autoclave for 15 min at 15 psi pressure–121°C.
Preparation of Medium: Add components, except NaHCO 3 and
Na 2 S·9H 2 O solution, to distilled/deionized water and bring volume to
1.0L. Mix well and heat to boiling for a few minutes . Cool rapidly to room
temperature while gassing with 80% N 2 + 20% CO 2 . Add NaHCO 3 and
adjust pH to 6.9. Distribute anaerobically under 80% N 2 + 20% CO 2 and
pressurize sealed containers up to 2 bar pressure. Autoclave for 15 min at
15 psi pressure–121°C. Prior to inoculation of cultures, add 0.25mL of
sterile Na 2 S·9H 2 O solution to each tube containing 9.75mL of sterile basal
medium.
Use: For the cultivation and maintenance of Archaeoglobus profun-
dus.