- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Medium for Campylobacter DSM 806 (DSMZ Medium 121)
[所属分类:培养基配方] [发布时间:2021-5-19] [发布人:网站管理员2] [阅读次数:] [返回]
Medium for Campylobacter DSM 806
(DSMZ Medium 121)
MgSO 4 ·7H 2 O................................................................................1.0g
Yeast extract..................................................................................0.2g
CaCl 2 ·2H 2 O .............................................................................28.0mg
Resazurin...................................................................................1.0mg
Cysteine phosphate solution..................................................100.0mL
Trace elements solution SL-10..................................................1.0mL
pH 7.0 ± 0.2 at 25°C
Trace Elements Solution SL-10:
Composition per liter:
FeCl 2 ·4H 2 O...................................................................................1.5g
CoCl 2 ·6H 2 O...........................................................................190.0mg
MnCl 2 ·4H 2 O ..........................................................................100.0mg
ZnCl 2 ........................................................................................70.0mg
Na 2 MoO 4 ·2H 2 O.......................................................................36.0mg
NiCl 2 ·6H 2 O..............................................................................24.0mg
H 3 BO 3 ........................................................................................6.0mg
CuCl 2 ·2H 2 O...............................................................................2.0mg
HCl (25% solution)..................................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl 2 ·4H 2 O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly. Gas under 80% N 2 + 20% CO 2 .
Cysteine Phosphate Solution:
Composition per 100.0mL:
K 2 HPO 4 .......................................................................................0.75g
NaH 2 PO 4 ...................................................................................0.25g
Cysteine-HCl·H 2 O......................................................................0.25g
Preparation of Cysteine Phosphate Solution : Add components
to 100.0mL distilled/deionized water. Mix thoroughly. Gas under 80%
N 2 + 20% CO 2 . Autoclave for 15 min at 15 psi pressure–121°C.
Preparation of Medium: Add components, except cysteine phos-
phate solution, to distilled/deionized water and bring volume to
900.0mL. Mix thoroughly. Adjust pH to 7.0. Gently heat and bring to
boiling. Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Aseptically add 100.0mL of sterile cysteine phosphate solution. Mix
thoroughly. Aseptically distribute into sterile tubes or flasks.
Use: For the cultivation of Sulfurospirillum sp.
(DSMZ Medium 121)
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
Na-aspartate................................................................................10.0gMgSO 4 ·7H 2 O................................................................................1.0g
Yeast extract..................................................................................0.2g
CaCl 2 ·2H 2 O .............................................................................28.0mg
Resazurin...................................................................................1.0mg
Cysteine phosphate solution..................................................100.0mL
Trace elements solution SL-10..................................................1.0mL
pH 7.0 ± 0.2 at 25°C
Trace Elements Solution SL-10:
Composition per liter:
FeCl 2 ·4H 2 O...................................................................................1.5g
CoCl 2 ·6H 2 O...........................................................................190.0mg
MnCl 2 ·4H 2 O ..........................................................................100.0mg
ZnCl 2 ........................................................................................70.0mg
Na 2 MoO 4 ·2H 2 O.......................................................................36.0mg
NiCl 2 ·6H 2 O..............................................................................24.0mg
H 3 BO 3 ........................................................................................6.0mg
CuCl 2 ·2H 2 O...............................................................................2.0mg
HCl (25% solution)..................................................................10.0mL
Preparation of Trace Elements Solution SL-10: Add FeCl 2 ·4H 2 O
to 10.0mL of HCl solution. Mix thoroughly. Add distilled/deionized
water and bring volume to 1.0L. Add remaining components. Mix thor-
oughly. Gas under 80% N 2 + 20% CO 2 .
Cysteine Phosphate Solution:
Composition per 100.0mL:
K 2 HPO 4 .......................................................................................0.75g
NaH 2 PO 4 ...................................................................................0.25g
Cysteine-HCl·H 2 O......................................................................0.25g
Preparation of Cysteine Phosphate Solution : Add components
to 100.0mL distilled/deionized water. Mix thoroughly. Gas under 80%
N 2 + 20% CO 2 . Autoclave for 15 min at 15 psi pressure–121°C.
Preparation of Medium: Add components, except cysteine phos-
phate solution, to distilled/deionized water and bring volume to
900.0mL. Mix thoroughly. Adjust pH to 7.0. Gently heat and bring to
boiling. Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Aseptically add 100.0mL of sterile cysteine phosphate solution. Mix
thoroughly. Aseptically distribute into sterile tubes or flasks.
Use: For the cultivation of Sulfurospirillum sp.