- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Magnetospirillum Medium (DSMZ Medium 380)
[所属分类:培养基配方] [发布时间:2021-5-12] [发布人:网站管理员2] [阅读次数:] [返回]
Magnetospirillum Medium
(DSMZ Medium 380)
L (+)-Tartaric acid........................................................................0.37g
Succinic acid...............................................................................0.37g
NaNO 3 ........................................................................................0.12g
Na-thioglycolate .........................................................................0.05g
Na-acetate...................................................................................0.05g
Resazurin...................................................................................0.5mg
Vitamin solution.......................................................................10.0mL
Trace elements solution.............................................................5.0mL
Ferric quinate solution...............................................................2.0mL
pH 6.8 ± 0.2 at 25°C
Trace Elements Solution:
Composition per liter:
MgSO 4 ·7H 2 O................................................................................3.0g
Nitrilotriacetic acid.......................................................................1.5g
NaCl..............................................................................................1.0g
MnSO 4 ·2H 2 O................................................................................0.5g
CoSO 4 ·7H 2 O...............................................................................0.18g
ZnSO 4 ·7H 2 O...............................................................................0.18g
CaCl 2 ·2H 2 O ..................................................................................0.1g
FeSO 4 ·7H 2 O..................................................................................0.1g
NiCl 2 ·6H 2 O...............................................................................0.025g
KAl(SO 4 ) 2 ·12H 2 O.......................................................................0.02g
H 3 BO 3 .........................................................................................0.01g
Na 2 MoO 4 ·4H 2 O..........................................................................0.01g
CuSO 4 ·5H 2 O...............................................................................0.01g
Na 2 SeO 3 ·5H 2 O...........................................................................0.3mg
Preparation of Trace Elements Solution: Add nitrilotriacetic
acid to 500.0mL of distilled/deionized water. Dissolve by adjusting pH
to 6.5 with KOH. Add remaining components. Add distilled/deionized
water to 1.0L. Mix thoroughly.
Vitamin Solution:
Composition per liter:
Pyridoxine-HCl........................................................................10.0mg
Thiamine-HCl·2H 2 O..................................................................5.0mg
Riboflavin..................................................................................5.0mg
Nicotinic acid.............................................................................5.0mg
D -Ca-pantothenate .....................................................................5.0mg
p-Aminobenzoic acid.................................................................5.0mg
Lipoic acid.................................................................................5.0mg
Biotin.........................................................................................2.0mg
Folic acid ...................................................................................2.0mg
Vitamin B 12 ................................................................................0.1mg
Preparation of Vitamin Solution: Add components to distilled/
deionized water and bring volume to 1.0L. Mix thoroughly. Sparge
with 80% H 2 + 20% CO 2 . Filter sterilize.
Ferric Quinate Solution:
Composition per 100.0mL:
FeCl 3 ·6H 2 O.................................................................................0.45g
Quinic acid..................................................................................0.19g
Preparation of Ferric Quinate Solution: Add components to
distilled/deionized water and bring volume to 100.0mL. Sparge with
N 2 . Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Preparation of Medium: Add components, except vitamin solu-
tion and ferric quinate solution, to distilled/deionized water and bring
volume to 988.0mL. Purge medium with N 2 gas for 10 min. Mix thor-
oughly. Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Aseptically and anerobically add 10.0mL vitamin solution and 2.0mL
ferric quinate solution. Mix thoroughly. Purge medium with N 2 gas for
10 min. Under the same atmosphere, anaerobically fill tubes to 1/3 of
their volume and seal. Autoclave at 121°C for 15 min. Before inocula-
tion, add sterile air (with hypodermic syringe through the rubber clo-
sure) to 1% O 2 concentration in the gas phase.
Use: For the cultivation of Magnetospirillum magnetotacti-
cum=Aquaspirillum magnetotacticum, and Magnetospirillum gryph-
iswaldense.
(DSMZ Medium 380)
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per liter:
KH 2 PO 4 .......................................................................................0.68gL (+)-Tartaric acid........................................................................0.37g
Succinic acid...............................................................................0.37g
NaNO 3 ........................................................................................0.12g
Na-thioglycolate .........................................................................0.05g
Na-acetate...................................................................................0.05g
Resazurin...................................................................................0.5mg
Vitamin solution.......................................................................10.0mL
Trace elements solution.............................................................5.0mL
Ferric quinate solution...............................................................2.0mL
pH 6.8 ± 0.2 at 25°C
Trace Elements Solution:
Composition per liter:
MgSO 4 ·7H 2 O................................................................................3.0g
Nitrilotriacetic acid.......................................................................1.5g
NaCl..............................................................................................1.0g
MnSO 4 ·2H 2 O................................................................................0.5g
CoSO 4 ·7H 2 O...............................................................................0.18g
ZnSO 4 ·7H 2 O...............................................................................0.18g
CaCl 2 ·2H 2 O ..................................................................................0.1g
FeSO 4 ·7H 2 O..................................................................................0.1g
NiCl 2 ·6H 2 O...............................................................................0.025g
KAl(SO 4 ) 2 ·12H 2 O.......................................................................0.02g
H 3 BO 3 .........................................................................................0.01g
Na 2 MoO 4 ·4H 2 O..........................................................................0.01g
CuSO 4 ·5H 2 O...............................................................................0.01g
Na 2 SeO 3 ·5H 2 O...........................................................................0.3mg
Preparation of Trace Elements Solution: Add nitrilotriacetic
acid to 500.0mL of distilled/deionized water. Dissolve by adjusting pH
to 6.5 with KOH. Add remaining components. Add distilled/deionized
water to 1.0L. Mix thoroughly.
Vitamin Solution:
Composition per liter:
Pyridoxine-HCl........................................................................10.0mg
Thiamine-HCl·2H 2 O..................................................................5.0mg
Riboflavin..................................................................................5.0mg
Nicotinic acid.............................................................................5.0mg
D -Ca-pantothenate .....................................................................5.0mg
p-Aminobenzoic acid.................................................................5.0mg
Lipoic acid.................................................................................5.0mg
Biotin.........................................................................................2.0mg
Folic acid ...................................................................................2.0mg
Vitamin B 12 ................................................................................0.1mg
Preparation of Vitamin Solution: Add components to distilled/
deionized water and bring volume to 1.0L. Mix thoroughly. Sparge
with 80% H 2 + 20% CO 2 . Filter sterilize.
Ferric Quinate Solution:
Composition per 100.0mL:
FeCl 3 ·6H 2 O.................................................................................0.45g
Quinic acid..................................................................................0.19g
Preparation of Ferric Quinate Solution: Add components to
distilled/deionized water and bring volume to 100.0mL. Sparge with
N 2 . Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Preparation of Medium: Add components, except vitamin solu-
tion and ferric quinate solution, to distilled/deionized water and bring
volume to 988.0mL. Purge medium with N 2 gas for 10 min. Mix thor-
oughly. Autoclave for 15 min at 15 psi pressure–121°C. Cool to 25°C.
Aseptically and anerobically add 10.0mL vitamin solution and 2.0mL
ferric quinate solution. Mix thoroughly. Purge medium with N 2 gas for
10 min. Under the same atmosphere, anaerobically fill tubes to 1/3 of
their volume and seal. Autoclave at 121°C for 15 min. Before inocula-
tion, add sterile air (with hypodermic syringe through the rubber clo-
sure) to 1% O 2 concentration in the gas phase.
Use: For the cultivation of Magnetospirillum magnetotacti-
cum=Aquaspirillum magnetotacticum, and Magnetospirillum gryph-
iswaldense.