- 定做培养基/定制培养基
- 颗粒培养基
- 标准菌株生化鉴定试剂盒
- 预灌装即用型成品培养基
- 2025年版中国药典
- 促销/特价商品
- 院感/疾控/体外诊断/采样管
- 样品采集与处理(均质)产品
- 按标准检索培养基
- 模拟灌装用培养基
- 干燥粉末培养基
- 培养基添加剂/补充剂
- 生化反应鉴定管
- 染色液等配套产品
- 对照培养基/标准品
- 实验耗材与器具
- 生化试剂/化学试剂
- 菌种鉴定服务
培养基配方
您现在的位置: 网站首页 >> 培养基配方
Low Iron YC Broth
[所属分类:培养基配方] [发布时间:2021-5-8] [发布人:网站管理员2] [阅读次数:] [返回]
Low Iron YC Broth
Solution 4.................................................................................30.0mL
Solution 2...................................................................................2.0mL
Solution 3...................................................................................1.0mL
pH 7.4 ± 0.2 at 25°C
Solution 1:
Composition per liter:
Yeast extract................................................................................20.0g
Casamino acids...........................................................................10.0g
KH 2 PO 4 .........................................................................................5.0g
CaCl 2 ·2H 2 O...................................................................................1.0g
Tryptophan..................................................................................0.05g
Preparation of Solution 1: Add components to distilled/deionized
water and bring volume to 1.0L. Mix thoroughly. Adjust pH to 7.4. Gen-
tly heat and bring to boiling. Filter through #40 ashless filter paper.
Solution 2:
Composition per 100.0mL:
MgSO 4 ·7H 2 O..............................................................................22.5g
CuSO 4 ·5H 2 O.................................................................................0.5g
ZnSO 4 ·5H 2 O.................................................................................0.2g
β-Alanine..................................................................................0.115g
Nicotinic acid............................................................................0.115g
MnCl 2 ·4H 2 O..............................................................................0.075g
Pimelic acid................................................................................7.5mg
HCl, concentrated ......................................................................3.0mL
Preparation of Solution 2: Add components to distilled/deionized
water and bring volume to 100.0mL. Mix thoroughly.
Solution 3:
Composition per 100.0mL:
L- Cystine .....................................................................................20.0g
HCl, concentrated ....................................................................20.0mL
Preparation of Solution 3: Add components to distilled/deionized
water and bring volume to 100.0mL. Mix thoroughly.
Solution 4:
Composition per 100.0mL:
Maltose .......................................................................................50.0g
CaCl 2 ·2H 2 O ..................................................................................0.5g
Preparation of Solution 4: Add components to distilled/deionized
water and bring volume to 100.0mL. Mix thoroughly. Autoclave for 10
min at 11 psi pressure–116°C. Cool to 25°C.
Preparation of Medium: To 1.0L of solution 1, add 2.0mL of so-
lution 2 and 1.0mL of solution 3. Mix thoroughly. Autoclave for 15
min at 15 psi pressure–121°C. Cool to 25°C. Aseptically add 30.0mL
of sterile solution 4. Mix thoroughly. Aseptically distribute into sterile
tubes or flasks.
Use: For the cultivation and maintenance of Corynebacterium diph-
theriae.
山东拓普生物工程有限公司 培养基配方 http://www.topbiol.com
Composition per 1033.0mL:
Solution 1......................................................................................1.0LSolution 4.................................................................................30.0mL
Solution 2...................................................................................2.0mL
Solution 3...................................................................................1.0mL
pH 7.4 ± 0.2 at 25°C
Solution 1:
Composition per liter:
Yeast extract................................................................................20.0g
Casamino acids...........................................................................10.0g
KH 2 PO 4 .........................................................................................5.0g
CaCl 2 ·2H 2 O...................................................................................1.0g
Tryptophan..................................................................................0.05g
Preparation of Solution 1: Add components to distilled/deionized
water and bring volume to 1.0L. Mix thoroughly. Adjust pH to 7.4. Gen-
tly heat and bring to boiling. Filter through #40 ashless filter paper.
Solution 2:
Composition per 100.0mL:
MgSO 4 ·7H 2 O..............................................................................22.5g
CuSO 4 ·5H 2 O.................................................................................0.5g
ZnSO 4 ·5H 2 O.................................................................................0.2g
β-Alanine..................................................................................0.115g
Nicotinic acid............................................................................0.115g
MnCl 2 ·4H 2 O..............................................................................0.075g
Pimelic acid................................................................................7.5mg
HCl, concentrated ......................................................................3.0mL
Preparation of Solution 2: Add components to distilled/deionized
water and bring volume to 100.0mL. Mix thoroughly.
Solution 3:
Composition per 100.0mL:
L- Cystine .....................................................................................20.0g
HCl, concentrated ....................................................................20.0mL
Preparation of Solution 3: Add components to distilled/deionized
water and bring volume to 100.0mL. Mix thoroughly.
Solution 4:
Composition per 100.0mL:
Maltose .......................................................................................50.0g
CaCl 2 ·2H 2 O ..................................................................................0.5g
Preparation of Solution 4: Add components to distilled/deionized
water and bring volume to 100.0mL. Mix thoroughly. Autoclave for 10
min at 11 psi pressure–116°C. Cool to 25°C.
Preparation of Medium: To 1.0L of solution 1, add 2.0mL of so-
lution 2 and 1.0mL of solution 3. Mix thoroughly. Autoclave for 15
min at 15 psi pressure–121°C. Cool to 25°C. Aseptically add 30.0mL
of sterile solution 4. Mix thoroughly. Aseptically distribute into sterile
tubes or flasks.
Use: For the cultivation and maintenance of Corynebacterium diph-
theriae.